If you’re having trouble finding the best dual flush toilet kit for your needs, you’re not alone. Not all products are designed with the same use or user in mind, so it’s important to know what you’re looking for.
We’ve tested over a thousand products, and have compiled a list of our top recommendations for the best dual flush toilet kit for various uses. Check our list below:
Our Expert Reviews for Top 10 Dual Flush Toilet Kit
The market is filled with many dual flush toilet kit. You might find yourself struggling to choose the best one. Our team considered tons of reviews when writing our recommendations for the best dual flush toilet kit in this article.
Danco Hyr460 Hydroright Hyrdroright Universal Water-Saving
- WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve
- COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS.
- FLUSH VALVE REPLACEMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve
- IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve
- ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain; the permafit silicone seal is also chlorine and chemical resistant and will not warp
- DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids
- DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.
Foreverpro Dfvfvk Universal Water Saving Dual
- ✅ Easy to Install – Made Exactly to Fit For Most Standard Top Brand 2” Toilets with 2 3/8″ to 2 3/4″ Tank Drain and 5/8″ to 3/4″ Square Button Mount Hole or 1 1/2″ Round Lid Hole
- ✅ No Questions Asked Money Back Guarantee. Proud USA Based Company. Comes with 1 Year Warranty or 90 Day Returns
- ✅ PRO Grade Premium Universal Water Saving Dual Flush Valve And Fill Valve With Push Button Toilet Repair Kit Fits Standard 2 Inch Drain – Meets or Exceeds OEM Specifications Quality. Comes Brand New in Original Retail Packaging
- ✅ ForeverPRO Universal Water Saving Dual Flush Valve And Fill Valve With Push Button Toilet Repair Kit Fits Standard 2 Inch Drain
- ✅ Save Water and Energy and up to 10,000 Gallons per Year. Eliminates Common Problems in toilets such as faulty toilet flapper, flapper chain and toilet handle. Fits 1.6 to 3.5+ gpf toilets with 2-inch flush valve. Includes split handle with flush activator
Danco Hyr451T Hyrdroright Universal Water-Saving Toilet
- WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
- ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
- HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required. This has an adjustable height of 11-13.8 inches.
- TOILET FLUSH VALVE COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
- DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids.
- IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
- DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.
Fluidmaster 550Dfrk-3 Duoflush Complete Fill And
- Convert your existing 2” flush valve toilet to Dual Flush technology
- Save water & money, uses up to 45% less water
- Retrofits to any 2” flush valve toilet, 1.6 GPF and pre 1994 3.5+ gallon per flush models
- Easy-to-install and fully adjustable for a wide range of settings, without removing the valve
- Complete fill & dual flush conversion system
- Full and half flush, Dual Action toilet flush lever included
- Replace noisy and slow filling inefficient models
- PerforMAX High Performance Fill Valve included for 2x greater refill rate
R&T A2422M 3″ Dual Flush Valve
- 【Enhance Your Toilet’s Performance】Fix a leaking toilet with 3″ (80 mm) drain outlet and turn into a powerful flushing. Using together with R&T fill valve & tank to bowl gasket and bolts will make your toilet flush like new again. Please note: fill valve, gasket and bolts kit are sold separately.
- 【Water-Saving】The 3 in. (80 mm) dual flush valve provides optional full flush for powerful flushing and half flush for water-saving flushing which reduces your bill. Lighter pushing force, more convenient for elder and children.
- 【Easy Installation & Adjustment】Easy installation without tools. Adjustable overflow tube to fit different tank heights(11.22″-15.15″), half and full water level adjusters to control water consumption.
- 【Modern Top Mount Dual Push Button】Endurable chrome ABS, fits dual flush toilet with 48mm mounting hole on ceramic lid.
- 【Warranty】Direct supply from global leading manufacturer,backed by 5 Years Warranty.
Zone Industry Corp. Dual Flush Valve,
- 🔔 SAVE WATER & MONEY: Dual Flush Valve with Full/Half flush that saves water and eliminates common leaky toilet problems due to a worn-out flapper, handle, or faulty flapper chain.
- 🔔 EASY INSTALLATION: Dual Flush Valve installs in less than 15 minutes. Fit For Most Standard Top Brand 2” Toilets with 2 3/8″ to 2 3/4″ Tank Drain and 5/8″ to 3/4″ Square Button Mount Hole or 1 1/2″ Round Lid Hole.
- 🔔 FIX TOILET PROBLEM: This toilet repair kit with 2-inch flush outlet; For two-piece toilet; replaces poor performing or cracked flush valves .
- 🔔 DESIGN & CERTIFICATION: Silicone seal free from leakage. UPC & CUPC, Water-saving certification and so on.
- 🔔 IDEAL PRODUCT: Fits for 1.6 to 3.5 gallons per flush toilet with a 2-inch flush valve. Works with standard 2-inch flush valve toilets, easy to upgrade a single flush toilet to dual flush.
Dual Flush Toilet Kit Plastic Adjustable
- B Easy to install: This product is easy to disassemble and install, and the structure is simple and not easy to damage
- Material use: The torsion spring is made of high-quality 304 stainless steel wire, durable and full of elasticity
- Push torsion bar design: Press the torsion bar with a total length of 10CM, which can be rotated, elongated and shortened, and can also be shortened by itself, which is easy to adjust
- Electroplating technology: Using high-end electroplating technology, multi-layer electroplating process, high brightness and ultra-smooth surface, long-lasting
- Note: Please check the size of your toilet lid hole before buying, our toilet button can be compatible with most double flush toilets with 38mm hole in the tank cover
T Tulead Toilet Dual Flush Valve,Fill
- Package Content:1 × Toilet Fill Valve;1 × Toilet Flush Valve;1 × Toilet Push Button
- Flush Valve Height:210mm/8.27″
- The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush,can save water to reduce unnecessary expenses
- Perfect replacements for toilet components,easy to clean and maintain
- Easy to install,half and full water level adjusters to control water consumption
2 Inch Toilet Flush Valves, Toilet
- FOR USE DUAL FLUSH TOILET KIT: This toilet flush valves only fit for 2-Inch One-piece toilet with top push button. This toilet flush valve replacement kit only applicable to 2.56″-2.95″(65mm-75mm)(about the size of a baseball) drainage hole diameter. Measure the toilet tank height, it should be 10″- 12.8″ (254 mm-325 mm). Please measure the above dimensions before buy it, and the toilet tank height should including ceramic cover for water tank, otherwise , it won’t fit.
- DUAL FLUSH WATER-SAVING TYPE: toilet repair kit Dual flush water-saving type,can adjust water in the water tank for all drainage or quick drainage. Half and full water level adjusters to control water consumption. It has good silicone washer, good elasticity, high density, sustainable use, and not easy to break.
- QUICK AND EASY INSTALLATION: Easy to install in 10 minutes or less, and saves time and effort,get your toilet flushing like new again. Including Glacier Bay, Aqua Source, Project Source and more.
- COMPATIBILITY: Our toilet drain valve is suitable for most one piece toilets.(not including flapper valve) , including Glacier Bay, Aqua Source, Project Source and more. Also can be use with TOTO, Swiss, Deer Valley, HOROW, WOODBRIDGE, Fine Fixtures, WinZo any many more brand. It is the same style as TOTO THU338. Please also confirm the length of the button lever can be matched the new valve before purchase, if not, you need to buy a new button.
- 1 YEAR WARRANTY FOR TOILET TANK FITTINGS: Any questions please feel free to let us know. Direct supply from global leading manufacturer, Ziosxin promises to the consumer with the purchase order to replace, which proves to be defective under normal installation and use for 1 years from the date of our chase.
Toilet Flush Valves 2-Inch Replacement Valve
- 1.UNIVERSAL DESIGN: Flush valve repair kit suitable for most 2-Inch one piece with top push buttom toilet.
- 2.MEASURE TWO SIZE: This item is only applicable to 2.56″-2.95″(65mm-75mm)(about the size of a baseball) Toilet tank hole Diameter,and it cannot be used if it exceed this size.Measure the Tank Height: Height Should be 10″- 11.8″ (25.4 cm-30 cm). Please measure the size including ceramic cover for water tank, otherwise , it won’t fit.
- 3.DUAL FLUSH WATER-SAVING TYPE: Dual flush water-saving type: for all drainage you can adjust water in the water tank; for half drainage, you can use the water in the water tank to adjust the silicone seal, it with good sealing effect, will not have leaking.
- 4.QUICK AND EASY INSTALLATION: Our toilet drain valve is suitable for most one piece toilets.(not including flapper valve) easy to install in 10 minutes or less, and saves time and effort,get your toilet flushing like new again.
- 5.TIPS: Please check the size in the second image before buying. Fit For TOTO THU338 flush valve.
The Top Factors to Consider When Choosing a Dual Flush Toilet Kit
Not necessarily have to be a master of that particular product for purchasing only. Just you need to focus on some important things that we are going to discuss below. Taking those simple considerations into account may make your buying experience more pleasant and straightforward. Let’s begin-
Know Your Needs
The first step is to determine your needs or requirements. If you aren’t aware of your needs, there’s a big chance you’ll spend a lot of money on the wrong things at the wrong time.
So, first and foremost, we recommend that you carefully consider your requirements for the best dual flush toilet kit. Make a short list of your requirements. This simple task will lead you to simplify your purchasing process. Because you will then understand what you should prioritize and what you should not.
Budget Vs Price
Budget is one of the most important issues to think about before you decide to buy anything. Producers and sellers can set any amount of price on your desired product. That depends on raw materials, manufacturing, transportation, and other operational costs, and most importantly on their brand value as well.
The higher quality you demand, the higher amount of money you may have to spend for that. That is the cause, why budget matters so much.
There is a popular proverb in our society, “Cut your coat, according to your cloth”. First, take your wishlist on your hand and search for those products on the internet. Analyze the features and prices carefully. Compare them well and choose the best one.
Now ask yourself whether you are capable enough to buy that particular product or not. If the answer is yes, then go for it. But if not, then remember, you always have the second-best option to choose yet.
Select the Correct Brand
Because of our emotional attachments, we are frequently predisposed toward certain brands. This practice produces positive results at times and negative results at other times.
However, there is no way to argue against the idea of relying on well-known brands. Because having enough cash in your pocket makes making decisions half as easy. But keep in mind that not all brands are suitable for all applications.
As a result, you must be extremely cautious while selecting the proper brand for your unique product.
There are a few tips that may come adjuvant for both of you at the time of choosing the right brand for the right product.
- Make sure in this case that you are well-versed in the brand.
- Whatever the public is trying to say about this brand.
- Analysis of the reviews of any specific products of that brand.
- Make a comparison of the features with others.
- Are those features sufficient for your needs?
Check the Features Section
You should check the features of the product first while purchasing it, no matter it is online or offline. If you want a clear idea about the product, then this is the best way. You will easily feel that your chosen product is capable enough to meet your demands or not.
The features section also assists us in quickly determining differences from others. The attributes can then be compared to similar items. One will gain a better understanding of quality as a result of this work, which will make it easier for us to reach a final decision.
Check the Merits and Disadvantages
Every product has its own set of benefits and drawbacks. Before buying any product it’s your responsibility to check out all things carefully. So be calm and figure out the drawbacks that you expected from dual flush toilet kit. Perhaps another manufacturer created the ideal one for you. Just don’t be too lazy to compare with them before you make the final move.
Quality and Endurance
Color, Style, Performance, Materials, and, most importantly, Durability are all aspects of quality. Before making a purchase, you must consider the facts about ensuring quality. We think you are actually paying the money for this. Does this dual flush toilet kit worthy or not against your investment? It completely depends on the quality that you are going to experience.
Warranties and Return Policies
Warranty, guarantee and return policies are those facts that you should never ignore even by mistake. No matter how quality the product is claimed, nobody can say that nothing will happen. Nothing is guaranteed to last forever. But you can expect at least a minimum return of value from the best product that you invested for.
Therefore, you should always be careful about checking policies. You will get some hidden and obscure policies sometimes which are hard to understand by going through their words only.
In that case, don’t buy anything until you get the whole thing unequivocally and be clear about every single issue of the policy.
Checking FAQs and Customer Reviews
Your time is precious and checking FAQ answers and customer reviews can save it hugely. On the other hand, you will get a real-life experience through the customer reviews in which they share their stories about the product.
By checking out those two things, you can get a clear idea of both. You may find there such information which might not come to your mind to ask if you didn’t go through. Then you will be able to decide strongly whether buying dual flush toilet kit will be worth or not.
Last Statement
We hope that you enjoyed the article in which we tried to provide you with proper guidelines to help you to buy the best dual flush toilet kit.
If this article come useful to you, then nobody can be happier than us. At the end, we can only be happy if you are satisfied completely.