This guide features the best dual flush toilet valve flapper options available, each of which represents the highest level of smart technology. We have chosen only those product models that are packed with robust features.
While there are many product models from last year still on the market, we have also included older models in our buying guide to give you a complete range of options.
Top 10 Dual Flush Toilet Valve Flapper Reviews
We have curated an extensive list of the top dual flush toilet valve flapper. Our team reviewed thousands of resources before putting any suggestions for the best dual flush toilet valve flapper in this article. So, check out the list below that’s found after long hours of research.
Danco Hyr271T Hydroright Dual Flush Valve
- WATER-SAVING TOILET FLUSH VALVE: The HydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving toilet which uses up to 70% less water for liquids and paper.
- REPAIRS COMMON LEAKY TOILET ISSUES: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet flapper, chain and handle which can often break.
- LEVER STYLE HANDLE: Includes lever style split handle flush activator that gives you a choice to use the quick-flush setting which uses less water volume for liquids and paper or the full-flush setting which uses the normal full flush water volume to accommodate solids.
- COMPATIBILITY: Fits 1.6 to 3.5+ GPF (gallons per flush) standard 2-piece toilets with 2 in. flush valve and requires 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid; Note: Will NOT FIT Mansfield toilets and is not compatible
- EASY NO-TOOLS REQUIRED INSTALLATION: Simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required.
- BUILT TO LAST: Constructed of durable plastic and the Perma fit silicone seal is chemical resistant and will not warp.
Danco Hyr451T Hyrdroright Universal Water-Saving Toilet
- WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
- ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
- HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required. This has an adjustable height of 11-13.8 inches.
- TOILET FLUSH VALVE COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
- DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids.
- IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
- DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.
Danco Hyr460 Hydroright Hyrdroright Universal Water-Saving
- WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve
- COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS.
- FLUSH VALVE REPLACEMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve
- IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve
- ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain; the permafit silicone seal is also chlorine and chemical resistant and will not warp
- DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids
- DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.
Dual Flush Valve Replacement Button
- Genuine replacement buttons for Glacier Bay and other Dual Flush Toilets
- Easy to install
- Fit’s 3” Dual Flush Valve, 2-Piece toilets, including Glacier Bay, AquaSource, Project Source and more
- Chrome finish
- Designed for Tank Lid Mount only
American Standard 7381655-200.0070A Vormax Valve Assembly,
- BEST-IN-CLASS: The American Standard Vormax toilet valve assembly provides optimal performance ideal for vormax toilets
- DURABILITY: Built to last, this toilet valve assembly by American Standard features a secure metal toilet chain and high performance flappers and teeter bar; American Standard toilet parts provide durability for bathrooms for years to come
- FLAWLESS DESIGN: Built to last, this toilet valve assembly by American Standard features a complete flush valve w/flappers, teeter bar, and tank to bowl coupling kit
- PERFORMANCE: The American Standard Vormax toilet valve assembly is essential for Vormax toilets featuring flushing technology that cleans two times better than conventional toilets
- INCLUDES: American Standard Vormax toilet valve assembly includes dual flappers with silicone seals and teeter bar
Fluidmaster 550Dfrk-3 Duoflush Complete Fill And
- Convert your existing 2” flush valve toilet to Dual Flush technology
- Save water & money, uses up to 45% less water
- Retrofits to any 2” flush valve toilet, 1.6 GPF and pre 1994 3.5+ gallon per flush models
- Easy-to-install and fully adjustable for a wide range of settings, without removing the valve
- Complete fill & dual flush conversion system
- Full and half flush, Dual Action toilet flush lever included
- Replace noisy and slow filling inefficient models
- PerforMAX High Performance Fill Valve included for 2x greater refill rate
Toilet Flush Valves 2-Inch Replacement Valve
- 1.UNIVERSAL DESIGN: Flush valve repair kit suitable for most 2-Inch one piece with top push buttom toilet.
- 2.MEASURE TWO SIZE: This item is only applicable to 2.56″-2.95″(65mm-75mm)(about the size of a baseball) Toilet tank hole Diameter,and it cannot be used if it exceed this size.Measure the Tank Height: Height Should be 10″- 11.8″ (25.4 cm-30 cm). Please measure the size including ceramic cover for water tank, otherwise , it won’t fit.
- 3.DUAL FLUSH WATER-SAVING TYPE: Dual flush water-saving type: for all drainage you can adjust water in the water tank; for half drainage, you can use the water in the water tank to adjust the silicone seal, it with good sealing effect, will not have leaking.
- 4.QUICK AND EASY INSTALLATION: Our toilet drain valve is suitable for most one piece toilets.(not including flapper valve) easy to install in 10 minutes or less, and saves time and effort,get your toilet flushing like new again.
- 5.TIPS: Please check the size in the second image before buying. Fit For TOTO THU338 flush valve.
Zone Industry Corp. Dual Flush Valve,
- 🔔 SAVE WATER & MONEY: Dual Flush Valve with Full/Half flush that saves water and eliminates common leaky toilet problems due to a worn-out flapper, handle, or faulty flapper chain.
- 🔔 EASY INSTALLATION: Dual Flush Valve installs in less than 15 minutes. Fit For Most Standard Top Brand 2” Toilets with 2 3/8″ to 2 3/4″ Tank Drain and 5/8″ to 3/4″ Square Button Mount Hole or 1 1/2″ Round Lid Hole.
- 🔔 FIX TOILET PROBLEM: This toilet repair kit with 2-inch flush outlet; For two-piece toilet; replaces poor performing or cracked flush valves.
- 🔔 DESIGN & CERTIFICATION: Silicone seal free from leakage. UPC & CUPC, Water-saving certification and so on.
- 🔔 IDEAL PRODUCT: Fits for 1.6 to 3.5 gallons per flush toilet with a 2-inch flush valve. Works with standard 2-inch flush valve toilets, easy to upgrade a single flush toilet to dual flush.
Korky 440Bp Dual Flush Seal Kit
- DUAL FLUSH SEAL KIT: Quickly fix running and leaking toilets while eliminating costly water waste. Includes 3 flush valve seals.
- EASY TO INSTALL: The 440BP fits the following toilet tank models – AquaSource (T801, EL205, 0400DF), American Standard (4339, 4348, 4349), Glacier Bay (N2316, N243OE, N2420, N2428R-DF, TL-6900-EW) and Mansfield (178)
- LONG LASTING red rubber
- WHY KORKY: Our high quality toilet products are universal & specific to both older & modern toilet models. Our repair parts are easy to install & made exclusively from long lasting chlorazone red rubber.
- REPLACEMENT TOILET PARTS: Try Korky Toilet Repair because we continue to commit to designing toilet repair parts that are unviersal to fit the majority of toilets. Designed & manufactured in Wisconsin.
Mansfield Dual Flush Valve Tower –
- Mansfield Dual Flush Valve Tower – 308DF3
- Provides a 1.1 and 1.6 gallon flush.
- Fits Mansfield Summit tank model 3386.
- 13-1/2″ overall height, 12″ from top of valve to toilet tank.
- Includes flapper, chain, stainless steel clip, seal, spud gasket, and nut
A Beginner’s Guide to Selecting the Right Dual Flush Toilet Valve Flapper
Are you looking to buy a new dual flush toilet valve flapper? Whether you’re in the market for dual flush toilet valve flapper, it’s important to make sure you’re getting the best product for your needs. Here is a guide to help you understand what to consider when making your purchase:
Why You Should Choose This Dual Flush Toilet Valve Flapper
The most important factor to consider when choosing a dual flush toilet valve flapper is whether or not it fits your needs. Make sure the dual flush toilet valve flapper you’re considering has the features that you need and that it’s a good value.
What to Look For Before Buying
Before buying a dual flush toilet valve flapper, it’s important to do your research. Read reviews and compare different models to make sure you’re getting the best product for your money. Also, make sure you understand the warranty and return policies of the product you’re considering.
Price of Dual Flush Toilet Valve Flapper
When considering price, it’s important to look at total cost and not just the initial price. Consider any additional fees, taxes, or shipping costs that might be associated with the product. Also, make sure you understand the return policies of the product you’re considering and any additional costs associated with returning it.
Quality of Dual Flush Toilet Valve Flapper
Quality is an important factor when considering a product. Make sure you understand the material used in the product and any warranties or guarantees that come with it. If the product is made up of multiple parts, consider how well those parts will stand up to use and how easy it is to repair or replace them if necessary.
Customer Service
Customer service is also an important factor when considering a product. Make sure you understand the company’s policies regarding returns, exchanges, and repairs. If you’re buying online, make sure the company has an easy-to-use website and a customer service department that can help you with any questions or issues.
These are just a few of the considerations you should keep in mind when choosing a dual flush toilet valve flapper. By taking the time to do your research and make sure you’re getting your desired dual flush toilet valve flapper for your needs, you can make sure you’re making a wise purchase.
Final Verdict
The last words of all, you must consider what value the product is providing against the price you are paying for. Does it make you satisfied or not? Do your demands be fulfilled with that?
Hope this article will come in handy for you to recognize and purchase the best dual flush toilet valve flapper in the market. Happy Shopping.