With so many product models on the market at different prices and with various features, selecting the best one can be overwhelming. But with a wide range of manufacturers offering a variety of options, you’re sure to find a dual flush toilet valve that fits your needs. Be sure to check out our top picks for some inspiration.
Our Top 10 Dual Flush Toilet Valve Reviews
We’ve analyzed countless reviews to make this article for you. If you are looking for the best dual flush toilet valve then our recommended top products would be an ideal choice.
American Standard 7381655-200.0070A Vormax Valve Assembly,
- BEST-IN-CLASS: The American Standard Vormax toilet valve assembly provides optimal performance ideal for vormax toilets
- DURABILITY: Built to last, this toilet valve assembly by American Standard features a secure metal toilet chain and high performance flappers and teeter bar; American Standard toilet parts provide durability for bathrooms for years to come
- FLAWLESS DESIGN: Built to last, this toilet valve assembly by American Standard features a complete flush valve w/flappers, teeter bar, and tank to bowl coupling kit
- PERFORMANCE: The American Standard Vormax toilet valve assembly is essential for Vormax toilets featuring flushing technology that cleans two times better than conventional toilets
- INCLUDES: American Standard Vormax toilet valve assembly includes dual flappers with silicone seals and teeter bar
Toilet Flush Valves 2-Inch Replacement Valve
- 1.UNIVERSAL DESIGN: Flush valve repair kit suitable for most 2-Inch one piece with top push buttom toilet.
- 2.MEASURE TWO SIZE: This item is only applicable to 2.56″-2.95″(65mm-75mm)(about the size of a baseball) Toilet tank hole Diameter,and it cannot be used if it exceed this size.Measure the Tank Height: Height Should be 10″- 11.8″ (25.4 cm-30 cm). Please measure the size including ceramic cover for water tank, otherwise , it won’t fit.
- 3.DUAL FLUSH WATER-SAVING TYPE: Dual flush water-saving type: for all drainage you can adjust water in the water tank; for half drainage, you can use the water in the water tank to adjust the silicone seal, it with good sealing effect, will not have leaking.
- 4.QUICK AND EASY INSTALLATION: Our toilet drain valve is suitable for most one piece toilets.(not including flapper valve) easy to install in 10 minutes or less, and saves time and effort,get your toilet flushing like new again.
- 5.TIPS: Please check the size in the second image before buying. Fit For TOTO THU338 flush valve.
2 Inch Toilet Flush Valves, Toilet
- FOR USE DUAL FLUSH TOILET KIT: This toilet flush valves only fit 2-Inch One piece toilet with top push button(Not including flapper valve). This toilet flush valve replacement kit only applicable to 2.56″-2.95″(65mm-75mm)(about the size of a baseball)drainage hole diameter. Measure the toilet tank height, it should be 12.8″- 17.7″(325mm-450mm),and the toilet tank height should including ceramic cover for water tank. Please measure the above dimensions before buy it, otherwise,it won’t fit.
- DUAL FLUSH WATER-SAVING TYPE: toilet repair kit Dual flush water-saving type,can adjust water in the water tank for all drainage or quick drainage. Half and full water level adjusters to control water consumption. It has good silicone washer, good elasticity, high density, sustainable use, and not easy to break.
- QUICK AND EASY INSTALLATION: Our toilet drain valve is suitable for most high water tank one piece toilets.(not including flapper valve) easy to install in 10 minutes or less, and saves time and effort,get your toilet flushing like new again. Including Glacier Bay, AquaSource, Project Source and more.
- COMPATIBILITY: For use with most 2-Inch one piece with top push button toilet, including Glacier Bay, AquaSource, Project Source and more. Also can be use with TOTO, Swiss, DeerValley, HOROW, WOODBRIDGE, Fine Fixtures, WinZo any many more brand.. Please also confirm the length of the button lever can be matched the new valve before purchase, if not, you need to buy a new button.
- 1 YEAR WARRANTY FOR TOILET TANK FITTINGS: Any questions please feel free to let us know. Direct supply from global leading manufacturer, TECETOOL promises to the consumer with the purchase order to replace, which proves to be defective under normal installation and use for 1 years from the date of our chase.
Danco Hyr460 Hydroright Hyrdroright Universal Water-Saving
- WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve
- COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS.
- FLUSH VALVE REPLACEMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve
- IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve
- ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain; the permafit silicone seal is also chlorine and chemical resistant and will not warp
- DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids
- DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.
Danco Hyr451T Hyrdroright Universal Water-Saving Toilet
- WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
- ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
- HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required. This has an adjustable height of 11-13.8 inches.
- TOILET FLUSH VALVE COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
- DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids.
- IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
- DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.
Dual Flush Valve Replacement Button
- Genuine replacement buttons for Glacier Bay and other Dual Flush Toilets
- Easy to install
- Fit’s 3” Dual Flush Valve, 2-Piece toilets, including Glacier Bay, AquaSource, Project Source and more
- Chrome finish
- Designed for Tank Lid Mount only
Fluidmaster 550Dfrk-3 Duoflush Complete Fill And
- Convert your existing 2” flush valve toilet to Dual Flush technology
- Save water & money, uses up to 45% less water
- Retrofits to any 2” flush valve toilet, 1.6 GPF and pre 1994 3.5+ gallon per flush models
- Easy-to-install and fully adjustable for a wide range of settings, without removing the valve
- Complete fill & dual flush conversion system
- Full and half flush, Dual Action toilet flush lever included
- Replace noisy and slow filling inefficient models
- PerforMAX High Performance Fill Valve included for 2x greater refill rate
R&T A2423 2″ Dual Flush Valve
- 【Enhance Your Toilet’s Performance】Fix a leaking toilet with 2″ (60 mm) drain outlet and turn into a powerful flushing. Using together with R&T fill valve & tank to bowl gasket and bolts will make your toilet flush like new again. Please note: fill valve, gasket and bolts kit are sold separately.
- 【Water-Saving】The 2 in. (60 mm) dual flush valve provides optional full flush for powerful flushing and half flush for water-saving flushing which reduces your bill.
- 【Easy Installation & Adjustment】Easy installation without tools. Adjustable overflow tube to fit different tank heights(11.33″-15.27″), half and full water level adjusters to control water consumption.
- 【Modern Top Mount Dual Push Button】Endurable chrome ABS, fits dual flush toilet with 38mm mounting hole on ceramic lid.
- 【Warranty】Direct supply from global leading manufacturer,backed by 5 Years Warranty.
Honbay Dual Flush Toilet Water Tank
- Package included: 1PCS 58mm Toilet Tank Button (and plastic accessory)
- Dual flush function
- Made of plastic and silver spray painting
- 58 mm thread dia, suitable for 58-65 mm tank hole
- Please check the size before purchasing due to the differences of tank hole
American Standard 7381091-400.0070A Dual Flush Valve,
- For use with American Standard H2 option toilet without an in tank liner
- Reliable performance
- Easy to install
- Country of Origin: Mexico
The Top Factors to Consider When Choosing a Dual Flush Toilet Valve
When it comes to making a purchase, whether it’s a small item or a major investment, it’s important to take the time to consider all of your options and make an informed decision. This can be especially true when it comes to choosing a product that you’ll be using on a regular basis or that has a significant impact on your life.
So, what should you look for before buying dual flush toilet valve? Here are a few key considerations:
Price of the Product: Price is often a major factor when it comes to making a purchase, but it’s important to remember that the cheapest option may not always be the best. Consider the long-term cost of the product, including any maintenance or repair costs, rather than just the initial purchase price.
Quality: Look for products that are made with high-quality materials and construction. A product that is built to last can save you money in the long run by not having to constantly replace inferior products.
Functionality: Consider the specific needs and goals you have for the product. Look for products that are designed to meet those needs and make your life easier.
Brand Reputation: Do some research on the company behind the product. Look for companies with a proven track record of producing high-quality products and standing behind their products with warranties and excellent customer service.
Customer Reviews: Read reviews from other customers to get a sense of their experiences with the product. Pay particular attention to reviews from customers with needs and goals similar to your own.
Return Policy: Look for products with a good return policy in case the product doesn’t meet your expectations or has any defects.
Environmental And Social Impact: If sustainability and social responsibility are important to you, consider products that are made with these values in mind. Look for companies that prioritize environmental sustainability and ethical business practices.
By considering these factors, you can make a more informed decision and choose a product that meets your needs and aligns with your values. Taking the time to do your research and make an informed decision can save you time, money, and frustration in the long run.
The Last Words
In conclusion, finding the right product for your needs can be a challenging task, especially with so many options available. It is important to do thorough research and consider a variety of factors, such as price, features, durability, and overall quality.
Reading reviews and comparing different products can also be helpful in making an informed decision. Ultimately, the best dual flush toilet valve for you will depend on your individual needs and preferences.
By keeping these things in mind and taking the time to carefully consider your options, you can be confident that you are making a wise purchase that will meet your needs and exceed your expectations.